irreverentad Posted March 29, 2012 Share Posted March 29, 2012 Bit of help from you 'handy' lot please. My kitchen tap as broken and won't turn on. I will need to replace it. It is a combination hot and cold one. Are kitchen taps easy to fit yourself? Or should I get a plumber to do it? Cheers Link to comment Share on other sites More sharing options...
chrisp65 Posted March 29, 2012 Share Posted March 29, 2012 access is usually a bugger but you'll feel chuffed with yourself if you get it done. Do you need to change the whole thing? Or have you got a coroded washer. google change a tap, if you've got a couple of spanners and other basic tools you should give it a go. good luck! Link to comment Share on other sites More sharing options...
Ingram85 Posted March 29, 2012 Share Posted March 29, 2012 Link to comment Share on other sites More sharing options...
Nigel Posted March 29, 2012 VT Supporter Share Posted March 29, 2012 Just remember to turn off the mains water first! Link to comment Share on other sites More sharing options...
irreverentad Posted March 29, 2012 Author Share Posted March 29, 2012 access is usually a bugger but you'll feel chuffed with yourself if you get it done. Do you need to change the whole thing? Or have you got a coroded washer. google change a tap, if you've got a couple of spanners and other basic tools you should give it a go. good luck! Cheers mate. It seems the mechanism is ****. So it will be a replacement of the whole thing. Access to the nuts is really nasty. But I am tempted to try it even though I have never done it before Link to comment Share on other sites More sharing options...
Recommended Posts